ELECTROMOTIVE FORCE AND RESISTANCE

The electromotive force is the very force that moves the electrons from one point in an electric circuit towards another. In case this e.m.f. is direct, the current is direct. On the other hand, were the electromotive force alternating, the current would be alternating, too. The e.m.f. is measurable and it is the volt that is the unit used for measuring it. A current is unable to flow in a circuit consisting of metallic wires alone. A source of an e.m.f. should be provided as well. The source under consideration may be a cell or a battery, a generator, a thermocouple or a photocell, etc.

In addition to the electromotive force and the potential difference reference should be made to another important factor that greatly influences electrical flow, namely, resistance. All substances offer a certain amount of opposition, that is to say resistance, to the passage of current. This resistance may be high or low depending on the type of circuit and the material employed. Glass and rubber offer a very high resistance and, hence, they are considered as good insulators. All substances do allow the passage of some current provided the potential difference is high enough.

Certain factors can greatly influence the resistance of an electric circuit. They are the size of the wire, its length, and type. In short, the thinner or longer the wire is, the greater the resistance offered is.

II. Give the English equivalents for the words below. Find in the text the sentences with these words and translate them:

1) трение; 2) электродвижущая сила; 3) элемент; 4) параллельное соединение; 5) сопротивление; 6) электромагнитная индукция; 7) переменный ток; 8) постоянное напряжение; 9) фотоэлемент.

III. Guess the meaning of the following international words and translate them:

reaction, electrostatic, electrometer, electroscope, volt, metallic.

IV. Say whether these sentences are true or false:

1.Alternatingforce always exerts its effort in one direction.

2. Alternating force is produced by electromagnetic induction.

3. The electromotive force is induced by motion of a conductor.

4. Resistance is an important factor that greatly influences electrical flow.

5. The type of the material employed doesn’t influence the resistance.

V. Answer the questions:

1) What factors cause the motion of electrons from one atom to another? 2) When is the electromotive force developed? 3) When does an electrostatic field appear? 4) How is the electromotive force induced? 5) What unit is used for measuring the electromotive force? 6) What are the sources of electromotive force? 7) What is called “resistance”? 8) How do the types of circuit and material influence the resistance? 9) Name the factors that influence the resistance of an electric circuit.

UNIT 9

I. Read the text.

Dynamos

The term „dynamo" is applied to machines which convert either mechanical energy into electrical energy or electrical energy into mechanical energy by utilizing the principle of electromagnetic induction. A dynamo is called a generator when mechanical energy supplied in the form of rotation is converted into electrical energy. When the energy conversion takes place in the reverse order the dynamo is called a motor. Thus a dynamo is a reversible machine capable of operation as a generator or motor as desired.

A generator does not create electricity, but generates or produces an induced electromotive force, which causes a current to flow through a properly insulated system of electrical conductors external to it. The amount of electricity obtainable from such a generator is dependent upon the mechanical energy supplied. In the circuit external to a generator the e.m.f. causes the electricity to flow from a higher or positive potential to a lower or negative potential. In the internal circuit of a generator the e.m.f. causes the current to flow from a lower potential to a higher potential. The action of a generator is based upon the principles of electromagnetic induction.

The dynamo consists essentially of two parts: a magnetic field, produced by electromagnets, and a number of loops or coils of wire wound upon an iron core, forming the armature. These parts are arranged so that the number of the magnetic lines of force of the field threading through the armature, coils will be constantly varied, thereby producing a steady e.m.f. in the generator or a constant torque in the motor.

II. Fill in the gaps with the words given below:

Не нашли, что искали? Воспользуйтесь поиском: