Replacing the Plastic Drive Pins

⇐ Предыдущая 27 28 29 30 313233 34 35 36 Следующая ⇒

	CAUTION
Tighten threaded joints with the prescribed torque values (table → chapter 4.4) Consider material and temperature

● Disconnect the drive from the power supply

● Remove the drive from the agitator lantern (lifting procedures → chapter 4.1 "Removing the Drive")

● Lower the drive (observe the insertion of the plastic drive pins into the coupling part A using the sight windows)

● Insert new plastic drive pins with a little glue

● Remove the plastic drive pins

● Attach the drive to the agitator lantern (tighten the bolts crosswise with half the final torque value, then crosswise with the full torque value)

● Remove the lifting gear

● Reconnect the drive to the power supply

Decommissioning

Safety Rules

	WARNING
Depending on the product processed, the agitator may be contaminated with residues of substances hazardous to health Health hazard when disassembling and disposing of equipment

WARNING

During the decontamination procedure, special safety measures must be taken zu (personal protective equipment, breathing apparatus) Particular attention must be paid to the "hidden dangers", such as when the product is toxic or corrosive and concealed residues are exposed during the disassembly of product-contacted components The mandatory rules and regulations for accident prevention of the country and place of use of the equipment and the generally recognized technical rules for safe and proper working conditions and procedures must be complied with when handling the agitator

● Before disassembling the agitator ensure that no residues of substances hazardous to health remain in or on it

⇐ Предыдущая 27 28 29 30 313233 34 35 36 Следующая ⇒

Не нашли, что искали? Воспользуйтесь поиском:

vikidalka.ru - 2015-2024 год. Все права принадлежат их авторам! Нарушение авторских прав | Нарушение персональных данных