ТОР 5 статей:
Методические подходы к анализу финансового состояния предприятия
Проблема периодизации русской литературы ХХ века. Краткая характеристика второй половины ХХ века
Характеристика шлифовальных кругов и ее маркировка
Служебные части речи. Предлог. Союз. Частицы
КАТЕГОРИИ:
- Археология
- Архитектура
- Астрономия
- Аудит
- Биология
- Ботаника
- Бухгалтерский учёт
- Войное дело
- Генетика
- География
- Геология
- Дизайн
- Искусство
- История
- Кино
- Кулинария
- Культура
- Литература
- Математика
- Медицина
- Металлургия
- Мифология
- Музыка
- Психология
- Религия
- Спорт
- Строительство
- Техника
- Транспорт
- Туризм
- Усадьба
- Физика
- Фотография
- Химия
- Экология
- Электричество
- Электроника
- Энергетика
Declares under sole responsibility
| gear units of the series | R.. F.. K.. S.. W.. | |
| with mount-on components of the series | AM AQA AL AD | |
| category | 2GD | |
| are in conformity with | ||
| ATEX Directive | 1994/9/EC | 2) |
| Applied harmonized standards: | EN 1127-1:2007 EN 13463-1:2009 EN 13463-5:2003 EN 13463-8:2003 EN 60529:2000 |
2) SEW-EURODRIVE lodges the documents required by 1994/9/EC, appendix VIll, with the notified body: FSA GmbH, EU ID no.: 0588
| Bruchsal | 16.05.11 | 
| |
| Place | Date | Johann Soder Managing Director Technology | a) b) |
| a) Authorized representative for issuing this declaration on behalf of the manufacturer b) Authorized representative for compiling the technical documents |
| 3-stage |
| 2-stage |
| When ordering spare parts always quote nameplate data with serial number and designation with part number! Mount-on gear units have motors, variable speed gear units or special input shaft assemblies mounted on the drive end. For parts see appropriate parts list. |
| Copyright reserved! All rights reserved according to DIN ISO 16016. |
| SEW-EURODRIVE GmbH & Co KG Postfach 3023. D-76642 Bruchsal Tel. (07251) 75-0. Fax (07251) 75-1970. http://www.sew.de |
| No. | Description | Additional specifications | SEW standard label | Part No. | Qty. |
| Pinion | * | ||||
| Gear | * | ||||
| Pinion shaft | * | ||||
| Gear | * | ||||
| Pinion shaft | * | ||||
| Gear | * | ||||
| Output shaft | Ø25x50 mm | ||||
| Output shaft | stainless; ASEPTICplus | Ø25x50 mm | |||
| Output Shaft (inch) | Ø1,000x1,97 in. | ||||
| Key | DIN6885 A8x7x40-C45K | ||||
| Key | stainless; ASEPTICplus | DIN6885 A8x7x40-Niro | |||
| Key (inch) | W4190 1/4x1/4x1-5/16 IN. | ||||
| Oil seal | W4560 BA-SF30x52x6/4,5-NBR | ||||
| Oil seal | optional oil seal in FKM (Viton); ATEX model according to category II2G, II2D, II3G, II3D; ASEPTICplus | W4561 BA-SF30x52x6/4,5-FKM | |||
| Oil seal | Double sealing as an option; ATEX model according to category II2G, II2D, II3G, II3D; ASEPTICplus | W4562 B1-SF30x47x4,6/6,6-FKM | |||
| Deep groove ball bearing | DIN625 6205-Z-J | ||||
| Circlip | DIN472 52x2 | ||||
| Hex head screw | ISO4017 M6x22-8.8 | ||||
| Output Flange | Ø120 mm | ||||
| Output Flange | Ø140 mm | ||||
| Output Flange | Ø160 mm | ||||
| Spacer tube | Ø25x030xx25,5 mm | ||||
| Key | DIN6885 B8x7x16-55HRC | ||||
| Breather valve | W4087 M10x1-MS | ||||
| Breather valve | stainless; ASEPTICplus | W4087 M10x1-NIRO | |||
| Gear Housing | |||||
| Deep groove ball bearing | DIN625 6004-J | ||||
| Gasket | |||||
| Key | DIN6885 B5x5x12-55HRC | ||||
| Spacer tube | Ø17x022x13,5 mm | 0641429X | |||
| Circlip | 2-stage; For i 10,13 to 28,37 | DIN471 17x1 | |||
| Circlip | 3-stage | DIN471 15x1 | |||
| Cylindrical roller bearing | 2-stage | F55359601.01 NUPT INA | |||
| Deep groove ball bearing | 3-stage | DIN625 6202-J | 0010485X | ||
| Circlip | DIN471 10x1 | ||||
| Deep groove ball bearing | DIN625 6300-J | 0010504X | |||
| Deep groove ball bearing | Only for mounting positions M2, MX | DIN625 6300-Z-J | |||
| Circlip | DIN472 35x1,5 | ||||
| Circlip | DIN472 35x1,5 | ||||
| Circlip | DIN472 26x1,2 | ||||
| Deep groove ball bearing | DIN625 6000-J | ||||
| Key | DIN6885 B4x4x8-55HRC | ||||
| Deep groove ball bearing | DIN625 6000-J | ||||
| Circlip | DIN472 26x1,2 | ||||
| Screw plug | W4085 M10x1-ST-A2L | 0011426X | |||
| Circlip | 2-stage | DIN471 16x1 | |||
| Circlip | 3-stage | DIN471 14x1 | |||
| Circlip | DIN471 20x1,2 | ||||
| Gearcase cover | |||||
| Hex head screw | ISO4017 M6x16-8.8 |
| * Gearing parts have embossed part numbers. These must always be quoted! |
| When ordering spare parts always quote nameplate data with serial number and designation with part number! Mount-on gear units have motors, variable speed gear units or special input shaft assemblies mounted on the drive end. For parts see appropriate parts list. |
| Copyright reserved! All rights reserved according to DIN ISO 16016. |
| SEW-EURODRIVE GmbH & Co KG Postfach 3023. D-76642 Bruchsal Tel. (07251) 75-0. Fax (07251) 75-1970. http://www.sew.de |
| No. | Description | Additional specifications | SEW standard label | Part No. | Qty. |
| Gasket | |||||
| Closing cap | W4300 35x8 | ||||
| Closing cap | W4300 28x7 |
| When ordering spare parts always quote nameplate data with serial number and designation with part number! Mount-on gear units have motors, variable speed gear units or special input shaft assemblies mounted on the drive end. For parts see appropriate parts list. |
| Copyright reserved! All rights reserved according to DIN ISO 16016. |
| SEW-EURODRIVE GmbH & Co KG Postfach 3023. D-76642 Bruchsal Tel. (07251) 75-0. Fax (07251) 75-1970. http://www.sew.de |
| When ordering spare parts always quote nameplate data with serial number and designation with part number! |
| Copyright reserved! All rights reserved according to DIN ISO 16016. |
| SEW-EURODRIVE GmbH & Co KG Postfach 3023. D-76642 Bruchsal Tel. (07251) 75-0. Fax (07251) 75-1970. http://www.sew.de |
| No. | Description | Additional specifications | SEW standard label | Part No. | Qty. |
| Snap ring | pinion shaft end Ø12 | W4173 SW11x1 -FS | |||
| Retaining ring | pinion shaft end Ø14 | DIN471 14x1-FS | |||
| Key | pinion shaft end Ø12 | DIN6885-1 A3x3x14 +C | |||
| Key | pinion shaft end Ø14 | DIN6885-1 A3x3x14 +C | |||
| Oil seal | DIN A22x40x7-NBR | ||||
| Oil seal | optional oil seal in FKM; ATEX model according to category II2GD | W A22x40x7-FKM | |||
| Stud | mounting to; W47 | DIN835 M8x25-8.8-A2F | |||
| Stud | mounting to; R27,F27,W37 | W4061 M6x16-8.8-A2F | |||
| Hex head screw | for flange Ø200 | ISO4017 M10x25-8.8-A2F | |||
| Hex head screw | for flange Ø250 | ISO4017 M12x30-8.8-A2F | |||
| Stud | for flange Ø120 | DIN939 M6x18-8.8-A2F | |||
| Stud | for flange Ø160 | DIN939 M8x25-8.8-A2F | |||
| Hexagon nut | for flange Ø120 | ISO4032 M6-8-St-A2F | |||
| Hexagon nut | for flange Ø160 | ISO4032 M8-8-St-A2F | |||
| Flange | Ø 120mm | 0165036X | |||
| Flange | Ø 160mm | ||||
| Flange | Ø 200mm | ||||
| Flange | Ø 250mm | ||||
| Flange | Backstop | Ø 120mm | |||
| Flange | Backstop | Ø 160mm | |||
| Flange | Backstop | Ø 200mm | |||
| Flange | Backstop | Ø 250mm | 0165196X | ||
| Adapter Shaft | AM80 pinion shaft end Ø12 | ||||
| Adapter Shaft | AM90 pinion shaft end Ø14 | ||||
| Adapter Shaft | AM80 Backstop; pinion shaft end Ø 12 | ||||
| Adapter Shaft | AM90 Backstop; pinion shaft end Ø 14 | ||||
| Sealing compound | X) | ||||
| Deep groove ball bearing | 6007-2Z-K01 | ||||
| Deep groove ball bearing | ATEX model according to category II2GD | 6007-2Z-K24 | |||
| Screw plug | for flange Ø120- Ø160 | W4085 M10x1-St-ADC3K | 0011426X | ||
| Breather valve | for flange Ø120- Ø160 | W4087 M10x1-CuZn-HEI | |||
| Screw plug | for flange Ø200- Ø250 | W4085 M12x1,5-St-ADC3K | |||
| Breather valve | for flange Ø200- Ø250 | W4087 M12x1,5-CuZn-HEI | |||
| Deep groove ball bearing | 6205-Z | ||||
| Cylindrical roller bearing | Backstop | NJ205E | |||
| Oel finger | W4291 22-A2F | ||||
| Backstop | W4943 RSAD55-25,1 | ||||
| Key | Backstop | DIN6885-1 A5x5x18 +C | |||
| Retaining ring | Backstop | DIN471 25x1,2-FS | |||
| Equalizing ring | Backstop | W4253 44x51x0,4 | |||
| Shield ring | Backstop | W4585 6205-ZAV | 0010714X | ||
| Retaining ring | DIN471 35x1,5-FS | ||||
| Adapter flange | Ø 200mm | ||||
| Hex head screw | ISO4017 M8x30-8.8-A2F | ||||
| Cam Ring | |||||
| Coupling half A | AM80 - Ø19 | ||||
| Coupling half A | AM90 - Ø24 | ||||
| Setscrew | ISO4027 M4x6-45H | ||||
| Key | AM80 | DIN6885-1 B6x6x16 55HRC | |||
| Key | AM90 | DIN6885-1 B8x7x14 55HRC |
| X) if required When ordering spare parts always quote nameplate data with serial number and designation with part number! |
| Copyright reserved! All rights reserved according to DIN ISO 16016. |
| SEW-EURODRIVE GmbH & Co KG Postfach 3023. D-76642 Bruchsal Tel. (07251) 75-0. Fax (07251) 75-1970. http://www.sew.de |
9.3
Не нашли, что искали? Воспользуйтесь поиском: